Scan a nutrition panel right here

Discover more
Get Produce Boxes
Produce
fresh produce

Upload a photo of the label or type the ingredient list in. You will get a health score, the numbers that matter, and what the sugar content actually means.

Or type it in

The nutrition information panel is the most standardised part of  food packaging, and the most frequently misread. It is not dishonest — it is regulated — but the choices about what to display prominently and which unit to use can make two very different products look comparable.

Try New Foods

A nutrition label scanner strips that away by reading the panel and putting the numbers on the same footing.

Per 100g vs Per Serve

This is the single most important thing to check, and the most common source of confusion.

Per 100 gram figures exist so that products can be compared fairly, regardless of how the manufacturer has chosen to define a serving. Per serve figures exist because that is what you actually eat.

Discover more
produce
Get Fresh Dairy
Order Seafood

The problem is that serving sizes are set by the manufacturer within loose regulatory bounds, and they vary wildly. A cereal might define a serving as 30 grams while a comparable one uses 45 grams. Compare the per-serve figures and the first looks better; compare per 100 grams and the difference disappears.

The rule is simple: use per 100 gram figures to compare products, and per serve figures to work out what you are actually consuming. Never compare per-serve figures across different products.

The Four Numbers That Matter

  • Energy. Kilojoules or kilocalories per 100 grams. Useful for comparing calorie density, though it says nothing about nutritional quality.
  • Discover more
    Find Recipes
    Find Supermarkets
    cook
  • Total sugar. Per 100 grams. As a rough guide, above 15 grams per 100 grams is high, below 5 is low. Note that this figure includes naturally occurring sugars from  fruit and dairy.
  • Sodium. Per 100 grams. Above 400 milligrams per 100 grams is high; below 120 is low. Sodium is worth more attention than most people give it.
  • Dietary fibre. Per 100 grams. Above 6 grams is high, below 2 is low. Fibre is the nutrient most consistently associated with better outcomes and the one most products lack.

Added Sugar: The Gap in the Panel

Most nutrition panels show total sugar without separating naturally occurring from added sugar. That is a genuine limitation, and it is why a fruit yoghurt and a chocolate bar can show similar sugar figures despite being very different foods.

To work out added sugar, you have to read the ingredient list and look for the sweeteners. There are more than sixty names for sugar used on Australian labels, and manufacturers split them deliberately so that none appears first. Our guide to hidden sugar names lists them, and our breakdown of reading a label like a nutritionistwalks through the process.

What the Ingredient List Adds

The panel gives you numbers; the ingredient list gives you context. Ingredients are listed in descending order by weight, which is the single most useful fact about the whole label.

If sugar, glucose syrup or a similar sweetener appears in the first three ingredients, the product is predominantly sugar regardless of what the panel says. If the first ingredient is a whole food — oats, tomatoes, chickpeas — you are on firmer ground.

There is a well-known loophole worth knowing: manufacturers can split an ingredient into several component parts so that no single one appears prominently. Three separate sweeteners listed seventh, eighth and ninth can add up to more than the first ingredient.

Reading the Claims

Front-of-pack claims are regulated but narrow. A few worth understanding:

  • "No added sugar" means no sugar was added. It says nothing about naturally occurring sugar, which may be high.
  • "Low fat" means below a set threshold. Fat is often replaced with sugar or starch, so check the sugar figure too.
  • "Source of fibre" means at least 2 grams per serve. That is a low bar.
  • "Natural" has no meaningful legal definition for most food products and can be applied to highly processed items.

Our guide to spotting misleading health claimscovers the rest.

Comparing Two Products Properly

A scanner makes comparison straightforward, but the method is worth knowing so you can do it by hand.

  • Find the per 100 gram column on both panels.
  • Compare sugar, sodium and fibre — not just energy.
  • Check the ingredient list length and what the first three ingredients are.
  • Prefer the product with more fibre and less sodium, unless there is a specific reason otherwise.

That process takes about ninety seconds and will change what you buy more than any single number on the front of the pack.

The Short Version

Use per 100 gram figures to compare products and per serve figures to know what you are eating. Watch energy, total sugar, sodium and fibre. Read the ingredient list for added sugar and to see what the first three ingredients are. And treat front-of-pack claims as marketing until the panel backs them up.

Frequently Asked Questions

Per 100g figures exist so products can be compared fairly regardless of serving size. Per serve figures show what you actually eat. Use per 100g to compare products and per serve to calculate your intake.